|
上午講題
|
講師
|
演講介紹
|
|
主題演講1 - Synopsys Optical Solutions Group: Recent Developments and Future Directions
|
Jake Jacobsen│資深技術行銷經理
Synopsys 光學解決方案部
|
The Synopsys Optical Solutions Group has a long history of providing industry-leading optical design software across a wide range of applications. In this talk we will briefly discuss the company and it’s history. We will then discuss our different product lines including: CODE V, LightTools, LucidShape, RSoft and our newest addition Phoenix PIC Design software. We will also talk about future developments for each of the software lines.
|
|
主題演講2-待定
|
待定
|
待定
|
|
主題演講3-Micro LED 檢測方案
|
待定│
TOPCON
|
待定
|
|
Track A- 成像
|
|
Modeling diffractive surfaces in CODE V
|
Bruce Irving │
全球經銷商資深業務經理
Synopsys 光學解決方案部
|
This talk will introduce features for modeling diffractive surfaces, using them to correct aberrations, and calculating diffraction efficiency.
|
|
LightTools之鏡頭雜散光分析
|
鄭至翔│應用工程師
思渤科技股份有限公司
|
- 鏡頭雜散光簡介
- 模型建構與模擬
- 巨集介紹與範例分享
- 光線路徑分析與實用功能
- 總結
|
|
CODE V 使用功能與技巧
|
黃振溢│應用工程師
思渤科技股份有限公司
|
待定
|
|
Athermal Optimization with the Enhanced ENVPIK
|
Bruce Irving │
全球經銷商資深業務經理Synopsys 光學解決方案部
|
This talk will introduce the ENVPIK utility for simulating thermal changes in an optical system and optimizing the system to compensate for these thermal changes.
|
|
Track B- 車用光學
|
|
Simulation Methodology for LiDAR on Chip
|
許成林│RSoft 產品經理
Synopsys 光學解決方案部
|
Simulation plays a critical role in the design and optimization of LiDAR on chip, but there is no single software tool that can completely handle such a complex device. In this paper, we present a simulation methodology that decomposes the complex structure into several simpler building blocks, and applies the appropriate algorithm to each. For example, the grating coupler, which is too big for a full FDTD simulation, can be treated through a coherent combination of individual grating simulation results. This provides a feasible solution which can be run on a typical PC.
|
|
車用光學設計與分析技巧
|
黃振溢│應用工程師
思渤科技股份有限公司
|
- 車用成像光學裝置簡介
- 倒車顯影設計與分析
- 光學設計最佳化策略
- 公差的分析與最佳化
- 光學元件材料選擇
- HUD設計與分析
- 總結
|
|
Optimizing Enclosed Energy for a Short Range LiDAR Receive
|
Bruce Irving │
全球經銷商資深業務經理
Synopsys 光學解決方案部
|
This talk focuses on some unique optical design functions available in CODE V. These functions enable designers to analyze and optimize for enclosed energy on detectors of various geometry. The main example discussed is a short range LiDAR receiver system, but the techniques apply to many design applications.
|
|
車用照明光學設計
|
呂明軒│應用工程師
思渤科技股份有限公司
|
- 車用照明光學概述
- 車用指針設計
- 導光條設計器－迎賓燈
- 車內閱讀燈設計
- 陣列式LED車前燈分析
- 總結
|
|
Track C- 照明
|
|
Understanding Étendue
|
Jake Jacobsen│
資深技術行銷經理
Synopsys 光學解決方案部
|
Étendue is one of the most important optical quantities in illumination design, yet it is one of the least understood among designers. In this talk we will attempt to de-mystify étendue by providing practical examples of how to apply the principle to real systems.
|
|
於LightTools內探討 Micro LED顯示器
|
呂明軒│應用工程師
思渤科技股份有限公司
|
- Micro LED發展簡介
- 量子效率量測系統－QE2000
- UV與藍光LED陣列光源
- 色彩轉換薄膜
- 色彩分析
- 總結
|
|
色彩學在影像工程與照明工程之應用
|
陳鴻興│副教授
台灣科技大學光電工程研究所
|
色彩學與影像設備、照明品質有著十分密切的關係，本演講從色彩學、色彩度量學與混色原理切入，進入影像顯示、影像擷取與白光照明的核心研究與應用，例如，跨媒體色彩管理、喜好色色彩再現、3D彩妝模擬技術、新式LED照明演色品質，啟發聽眾思考如何結合色彩元素進行跨領域應用。
|
|
Freeform Design in LightTools
|
Jake Jacobsen│
資深技術行銷經理
Synopsys 光學解決方案部
|
The use of freeform optics is becoming more common and more critical to optical designs. LightTools has a unique, advanced Freeform Design tool. This tool allows users to quickly design freeform reflectors and lenses to meet a wide variety applications. In this talk we will review the capabilities and usage of the Freeform Designer including the new distortion correction tool that allows users to compensate for intervening optics such as projection lenses, fixture covers and turn mirrors. The talk will include a number of live demonstrations.
|
|
Track D-穿戴裝置
|
|
3D 深度感測之透鏡設計
|
胡理策│應用工程師
思渤科技股份有限公司
|
- 深度感測簡介
- 繞射元件簡介
- 結構光深度感測之透鏡設計
- VCSEL 雷射陣列分析結果
- 光柵整合分析
- 總結
|
|
新一代繞射光學-平板聚焦元件的新時代
|
鄭鈺潔│助理教授
台北科技大學光電工程系
|
光學聚焦元件的設計上從日常生活隨處可見的光學鏡頭的應用，到微奈米的積體光路元件，都能將光源成像或聚焦至同一個點，但對於高品質成像或是聚焦元件積體化，一直是科學家和工程視為挑戰之一。新一代的聚焦元件打破傳統厚重的凹凸透鏡，此平面鏡頭也稱超穎透鏡(Metalenses)，不需透鏡消弭像差，只需要薄薄一片基板上面製作奈米柱陣列，即可達到高解析影像。這樣的微小結構設計，需要的空間更小，高成像效率，可達到裝置輕薄化，可應用於需要輕薄的穿戴裝置，例如AR/VR眼鏡等。
|
|
Design and Simulation of Metalens Structures with RSoft and CODE V
|
許成林│RSoft 產品經理
Synopsys 光學解決方案部
|
Metalens has attracted a lot of attention latterly and design such component remains a challenge problem because of its optically big device with tinny nano-structure. In this talk, we demonstrated an effective simulation approach for metalens design by combining multiple Synopsys tools. Rigorous RSoft FullWAVE or DiffractMOD are used to calculate the phase delay of various nano-cells, and efficient BeamPROP or CODE V BSP are used to trace the beam propagation through the metalens or its phase mask. The test example shows that this multi-tool combined approach is accurate and efficient with reduced demand on computational memory and time.
|
|
光學式心率感測器之模擬與設計
|
鄭至翔│應用工程師
思渤科技股份有限公司
|
- 心率感測器簡介
- 心率感測器模型建構
- 生物組織之模擬
- 系統模擬與最佳化設計
- 總結
|
